Tetrion Fast acting Mould & Mildew Remover- Cleans & prevents mould, algae & fungus growth on tiles, walls, PVC & skirting boards. Bleach Free. Kills and prevents growth of mould, algae and fungus. Directions for Use Remove mould and strip back to bare surface, removing loose material by washing with warm, soapy water. Shake the bottle and turn nozzle to "On” position. When surface is dry, spray on and rub surface with a brush or sponge. Allow to dry thoroughly before decoration. Always store and transport the trigger bottle in an upright and secure position. Note: Always test product first on an inconspicuous area to confirm suitability. STATUTORY CONDITIONS FOR USE For use only as a surface biocide. Apply 500ml of product per 2 square metres of surface. Wear suitable protective clothing (coveralls) and synthetic/pvc gloves when using. Do not breathe spray mist. Otherwise wear respiratory protective equipment and eye protection (see HSE guidance booklet HS(G)53 "Respiratory protective equipment- a practical guide for users”). Do not contaminate foodstuffs, eating utensils or food contact surfaces. Cover water storage tanks, fish tanks/bowls before application. This material and its container must be disposed of in a safe way. When using do not eat, drink or smoke. Unprotected persons and animals should be kept away from treated area for 48 hours or until surfaces are dry. Prevent any surface run-off from entering drains. Dangerous to fish and other aquatic life. Do not contaminate watercourses or ground. Avoid all contact with plant life. This product is approved under The Control of Pesticide Regulations 1986 (as amended) for use as directed. HSE 4206 Use only in accordance with the directions on the label