UVIWAX UV-PROTECTION UNIQUE NON-YELLOWING UV-PROTECTION UV-resistant and non-yellowing Water and dirt resistant Saliva-resistant and sweatproof, suitable for children’s toys Microporous, breathable finish which does not crack, peel or flake No sanding necessary for spot repairs or future applications SURFACE PREPARATION Wood surface must be clean, dry and frost-free (moisture content max. 18%, coating temperature at least +10°C). Osmo Uviwax UV-Protection is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works. Degrease very resinous woods (e.g. Larch) with Osmo Brush Cleaner and Thinner. Osmo Uviwax UV-Protection is to be used alone and solely applied to raw wood. If necessary, sand wood again with fine sandpaper. Wood treated with Osmo Uviwax UV-Protection generally only need to be cleaned and recoated. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.