The Oregon Arch creates a unique focal point in the garden and can be used to separate one area from another, forming an ideal support for flowering climbing plants.The sturdy range is not to be confused with cheaper and less robust products on the market. Our products are 100% British designed and British made, from robust sturdy steel.Arch Base Types: Hardstanding: includes all of the necessary fittings to fit the arch on a hard even surface, allowing for 30.5cm of additional height Dimensions: Width 152cm Diameter 53cm Height 239 cm Weight: 17Kg (May require two or more people to carry) Package Contents: 2x Curved panels with 2 connector tubes 1x Curved panel with 4 connector tubes 2x Straight panels with 2 connector tubes 2x Straight panels without connector tubes Please note that this is the arch only and the infills are NOT included. We are also selling the arch with the infills if you wish to have these too.Assembly and Care: The Oregon Arch simply slots together. We recommend that you use lubrication at each joint. When slotting the panels together we suggest you start by assembling the top curved section first. Then add the uprights. Two people may be needed for this assembly. When slotting the panels together make sure that you keep both sides level to avoid locking. With simple and sensible care the Antique Black product should give many years of pleasure. The arch is powder-coated over phosphate primer for outside use. However, as the final finish is applied as a dry powder and then stoved, some of the joints and in particular scroll joints may not be fully covered by the powder prior to stoving. We are continually working to keep this occurrence to a minimum. However, we cannot guarantee complete cover at all times. If you find any small rust patches appearing from this or transit damage, we advise that it is quickly treated with a good quality exterior paint such as Hammerite.