SLOPED FLOOR-WALL SHOWER PROFILE Sloping strips for a linear drain are the best solution if you value a professional approach to finishing your bathroom. Thanks to the shower tray strip, your shower will acquire a neat and elegant look. The slope strip is intended to mask the unsightly end of the tiles and at the same time allow a slope towards the drain without the need to cut the tiles into an "envelope". The strip forces a 2% drop, so you can be sure that your shower is perfect in every aspect, both technical and visual. Choose a practical solution: A product in the spirit of DIY The main advantage of our shower tray strips is their ease of installation and cutting. Any beginner DIY enthusiast can handle them without any problems. All you need for installation is tile glue and silicone, while cutting can be done with an angle grinder or a saw blade. That's all you need to easily achieve a beautiful visual effect. How to choose the right strip? Remember that the strips are available in left and right variants and in two standard lengths: 120 cm and 180 cm. Stand in front of the drain of the line: your left hand is the left strip and your right hand is the right strip. If you have a floor or glass on one side, remember that instead of a wall strip, you should use a perimeter strip, or no strip at all. Important note - If you use the 180 cm side profile ( LS 180 cm ) and at the same time want to use the front profile ( LC ) on the front part of the shower tray, due to the compatibility of the elements, this profile must be purchased in the 180 cm version ( LC 180 cm ), just as the 120 cm side profile (LS 120 cm ) must be used with the front profile ( LC ) of the 130 cm shower tray ( LC 130 cm ) . length: 120/180 cm profile width: 1.2 cm up to 3.0/4.0 cm Material: SUS 304 stainless steel, PVD coloring method, can be cut to size with angle grinder or metal shears application: flooring