THE WORKS PRO Sealant & Adhesive Geocel THE WORKS PRO is a high performance sealant and adhesive, which can be used internally or externally on almost any surface and in wet or dry conditions. Using THE WORKS PRO, there is no shrinking, no staining, no solvents and no need for additional fixings for most applications. Benefits Use on wet or dry surfaces Cures underwater Bonds and seals virtually any material Paintable Resists mould growth Excellent service temperature range Excellent resistance to UV Substrate Type Wood Metal Glass Stone Plastic Masonry Polystyrene Concrete Brick Tile Plaster Wet surfaces Technical Information Where to use Interior/Exterior Paintable Yes Skin Overtime 15 min Time to cure 24 hours Time to cure disclaimer 3mm per 24 hours Container Type Cartridge Shelf life 1 year Sizes 290 ml Application method Sealant Gun and Cartridge Application Surface Preparation Ensure substrates, gaps and cracks are clean and free from dust, dirt and grease. Application Instructions Remove nozzle and cut off the tip of the cartridge. Replace the nozzle and cut the tip to the required width at a 45 degree angle. To secure: Apply Geocel The Works Pro in dots or beads. Once applied, surfaces should be firmly pressed together. To seal: Apply a continuous bead of Geocel The Works Pro ensuring it makes full contact with the sides and back of the joint. Tool within 5 minutes for a professional finish. Clean up Uncured sealant can be removed with THE WORKS Spray Multi Use Cleaner or a suitable solvent.