Handy and compact vacuum cleaner, easy to use and easy to transport. The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result. By actuating manual filter cleaning, dust deposited in the filter element is removed by a targeted blast of air. Level monitor, no malfunctions when drawing in liquids thanks to installed float valve. With appliance socket and electronic automatic switch on/off. Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose. With accessories magazine for suction nozzles and suction tubes on the back. Equipped with large wheels and two swivel guide rollers. Features a filter bag made of highly tear-proof fleece for optimum filling. The extracted dust can be disposed of without difficulty. Selector switch suction diameter of 32 mm or 21 mm to adjust the optimum flow rate. The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding. Dust-protected antistatic finish prevents electric charging of the suction hose. Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak). Flow sensor technology monitors the flow rate and emits an audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s. Kit contains: 1x antistatic suction hose.