404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It also leaves a residual surface to help prevent further infestation. USES Kills mould and fungal growth caused by damp on internal and external floors and walls. Kills mould and fungal growth on roofs prior to coating with bituminous coatings. Removes algae, lichen, green slime and fungal growth from patios/drives. CHARACTERISTICS / ADVANTAGES Internal and external use. Fast acting. Leaves a residual surface to prevent future infestation. Powerful formula. APPLICATION INSTRUCTIONS Always read label before use and wear suitable protective equipment. Supplied ready to use. Do not dilute. Remove all surface debris and growth from the area to be treated. Apply by brush or spray at a rate of 1 litre per 5 - 10m2 depending on porosity of surface. Leave solution for 20 minutes. Finally, wash down the area with water. Repeat process for badly infested areas. Take care not to allow residues to run directly into fresh watercourses. LIMITATIONS Ready to use - do not dilute For use only as specified as a surface biocide. EVERBUILD� 405 Path Patio Seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of sunlight, water, oil, petrol and organic growth. The milky solution dries to a hard wearing water repellent film which gives a low sheen, slip resistant finish which will reduce dirt pickup and facilitate easier cleaning. The product is safer to use than conventional solvent based products, i.e. it is non-flammable and will not harm plants and animals when used as directed. USES Where it will protect from the effects of sunlight, water, oil, petrol and organic growth on: Paths Patios Natural stone Concrete Block paving CHARACTERISTICS / ADVANTAGES Solvent free formulation � n