DOWSIL™ 784 Glazing Silicone Sealant DOWSIL™ 784 is a one part, silicone sealant. It has good adhesion to glass, aluminium and other non-porous construction substrates. It is ideal for use as a weather-sealant in areas that may be subject to high humidity, such as windows, bathrooms and kitchens where mould growth can occur. Benefits Contains a fungicide to resist mould growth Fast cure - tack free in one hour Resistant to UV radiation and temperature extremes Conforms to ISO 11600-G-20LM Technical Information Where to use Interior/Exterior Paintable No Time to cure 24 hours Time to cure disclaimer Sealant cure rate is 2mm per 24 hours Container Type Cartridge Sizes 310 ml Application method Sealant Gun and Cartridge Application Surface Preparation Ensure that surfaces to be sealed are clean, dry, sound and free from frost, release agents, old sealants and other contaminants which could impair adhesion. All surfaces should be cleaned and degreased by wiping with a suitable solvent such as DOWSIL™ R-40 Universal Cleaner on a clean oil and lint free cloth before application of sealant. Application Instructions Apply sealant to the desired area using a sealant gun. Once finished, the joint should be tooled within 5 minutes of application to ensure good adhesion. For an extensive list of application methods, please consult the Technical Data Sheet. Clean up Excess sealant may be cleaned off tools and non-porous surfaces whilst in an uncured state using DOWSIL™ R-40 Universal Cleaner. If sealant is misapplied to porous substrates, it should be left until it is just cured and then removed by peeling, cutting or other mechanical means. Care should be taken not to damage plastic or coated surfaces.