A high quality acrylic polymer-based metallised floor polish, which dries to a deep gloss and burnishes to an outstanding 'wet look' finish, with excellent slip resistance. An ultra modern polish, which offers gloss, ultimate durability, and the perfect base to clean, protect and prolong the life of a floor. Suitable for use on non-porous floors, including; vinyl, thermoplastic, linoleum, rubber, asphalt, sealed wood, marble and terrazzo. PREPARATION: To obtain optimum results, it is important that thorough preparation of the floor is undertaken. The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover such as Clover Chemicals' REMOVE or ZIP STRIP. The floor must be well rinsed with water and allowed to dry before applying DIAMOND EXTRA. APPLICATION: Apply a thin film of DIAMOND EXTRA(undiluted) using a mop or polish applicator. Drying time is normally around 30 minutes. Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering. In general, 5 litres of DIAMOND EXTRA will cover approximately 300 square metres of floor.