A trade rated panel saw capable of handling 8 x 4 panels. The sliding beam has a heavy duty construction with a telescopic support arm under the outrigger table, to allow heavier panels to be effortlessly moved. The back fence is 1200mm long and is extendable to 2100mm. There is a sliding production stop with a metric measuring scale. The fence can be set at any angle between 90 and 45 degrees. For crosscutting solid wood there is also an auxiliary mitre fence which is adjustable 60 degrees each way and has a cam lock vertical work clamp. The rip fence runs on a solid steel bar and allows dimensions of up to 1225mm to be set. The is also a micro adjuster to allow the rip fence to be moved by small amounts. A 3hp braked induction motor supplies the power for cutting up to 100mm depth. Supplied with emergency stop button, 24 tooth TCT sawblade, sliding beam, rear extension table, right hand extension table, dust extraction outlet 100mm diameter, 2.0m power cable and fitted 16 amp plug. Charnwood W670 Specification Main Table Size 760mm x 960mm Maximum Ripping Width Using Fence 940mm Maximum Crosscutting Width 1225mm Blade Tilt 90 – 45 degrees Cutting Depth at 90 degrees 100mm Cutting Depth at 45 degrees 75mm Blade Diameter x Bore x Kerf 315mm x 30mm x 3.2mm Work Table Height 875mm Motor (induction) Braked 2200w (3hp) / 240v No-load Blade Speed 4250 Minimum Blade Width (Kerf) 3.2mm Dimensions (WxDxH) 2500mm x 1400mm x 1250mm Minimum Floor Area Required (WxD) 2500mm x 3100mm Min Door Opening:Width In Crate 103cm Weight 194Kg Db (Without Load/With Load) 81Db/89.5Db Rating Trade Product Guarantee 5 Years It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. Please note: It is not possible to use a stacked dado set with this saw.