Cast Iron Table Saw with an 8″ diameter blade. Now available with an upgraded quick action precision rip fence W619 Table saw is a compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage has a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, 2.0m power cable and UK 3 pin plug. There are 3 ways to configure the table saw. For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required. Charnwood W619 Specification Main Table Size 530mm x 1000mm Maximum Ripping Width Using Fence 730mm Crosscut Table Size 400mm x 180mm Maximum Crosscutting Width 600mm (700mm Using Reverse Table) Blade Tilt 90 – 45 degrees Cutting Depth at 90 degrees 60mm Cutting Depth at 45 degrees 47mm Blade Diameter 200mm Blade Bore 30mm Work Table Height 860mm Mitre Guide T-Slot Width 15/19mm Mitre Guide T-Slot Depth 7mm Motor (induction) 1100w (1.5hp) / 240v No-Load Blade Speed 4700 rpm Minimum Blade Width (Kerf) 2.6mm Dimensions (WxDxH) 1460 x 1010 x 1030mm Min Door Opening:Width In Crate 50cm Weight 90Kg Rating Light Trade Product Guarantee 5 Years It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips.