A solid and well finished planer thicknesser for the busy workshop. Precision Ground Cast Iron Beds 2hp Induction Motor 3 Blade Cutterblock for Superior Finish 10” Planing Capacity 10” x 7” Thicknessing Capacity Rubber Coated Outfeed Roller 100mm diameter Dust Extraction Outlet Precision ground cast iron beds & a long tilting fence which can be positioned at any point across the table make this machine a delight to use. The 3 blade cutterblock is powered by a 2hp induction motor & is capable of a cut upto 5mm deep in a single pass. To gain better visibility & access for thicknessing both of the planing beds are hinged and swing out of the way without using any tools. A dust hood / cutter guard is then swung into position & the conversion to Thicknesser is complete. The feed roller drive features a rubber outfeed roller, can be disengaged during planing operations to save motor power & general wear on the machine. Supplied with 3 blades, 100mm dust extraction outlet, 4 adjustable feet, 1.6m power cable & UK 3 pin plug. Our planer thicknesser will run off any standard 13amp supply. W583 Specification Surfacing width 250mm (10″) Length of surfacing tables 1085mm Maximum depth of cut 5mm Fence tilt 90 – 45 degrees Table height 856mm Thicknessing capacity 5-195mm (1/4″-7″) Length of thicknessing table 600mm Feed speed 5.5m/min Maximum depth of cut 2.5mm Cutterblock speed 4000rpm Number of blades 3 Motor ( induction) 1500w (2hp) Dimensions (WxDxH) 1100mm x 780mm x 1050mm Weight 150kg Rating Trade Product Guarantee 5 Years Min Door Opening:Width In Crate 50cm Min Door Opening: Width Out of Crate 44cm It is essential to use dust extraction, the extractor removes all the dust & chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the blades.