A bench top woodworking bandsaw with a 4” cutting capacity. Precision Ground Cast Iron Work Table Quick Action Locking Rip Fence Supplied with High Quality British Made Blade Quiet Induction Motor Crosscutting Mitre Guide Included 4” Cutting Depth Capacity 10” Cutting Width (Throat) Quick Action Blade Tension Setting The quick release fence locks securely onto the front rail of the table to provide a rigid straight guide for ripping. A magnifier is included to aid accurate setting of the fence along the scale, marked out in mm. The fence can be fitted on either side of the blade. The rack & pinion blade guard design is adjusted by using a dial on the side of the machine. The blade is then guided by two side facing bearings and a rear thrust bearing attached to the end of the guard. The side bearings are mounted on an eccentric cam, for faster setting, and can be adjusted without using any tools. The same guide set up is repeated below the table giving maximum blade control and keeping the blade true when a straight cut is required. A safety feature, only usually found on larger bandsaws, is the addition of micro switches on the doors to prevent accidental startup when changing a blade. Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8″ high quality British made blade, NVR switch, 100mm diameter extraction outlet, push stick, 2.0m power cable and UK 3 pin plug Charnwood BS410 Specification Maximum cutting depth: 100mm (4″) Throat width: 245mm (10″) Max. cutting width with fence: 130mm Left / 130mm Right Table size: 340mm x 335mm Table size with extension: 490mm x 335mm Table tilt: 0-45 degrees Mitre Guide T-Slot: 9mm / 14mm Cutting speed: 730m/min Motor (induction): 370w (1/2hp) Dimensions (WxDxH): 570mm x 500mm x 840mm Weight: 30Kg Rating: Hobby