390mm x 500mm LED Illuminated Bathroom Mirror – IP44Features:Tuneable White – This mirror has 2 vertical strips of LEDs that can be set to either warm white, natural white or cool white via the touch button located within the face of the mirror for easy access. The mirror will remember the colour you have selected and will power up with that selected colour providing that the last selected colour was left on for at least 8 seconds. Dimmable – The brightness of the light can be adjusted by touching and holding the button mentioned above. Press and hold until the desired brightness is achieved.Demister – Turning on the light on this mirror will engage the demister. This will stop the mirror fogging up in a bathroom when a hot shower is running. No need to wipe the mirror down. The mirror has a great safety & energy saving feature that will automatically switch off the demister after 30 minutes of continued use. Perfect if you forget to switch the mirror off. Shaver Socket – The mirror has a convenient built-in shaver socket. Full shaver socket specifications can be found below.Mounting – This mirror can only be mounted in a portrait orientation but it is very easy to mount. The mirrors mounting points are only 180mm apart horizontally and 380mm apart vertically. There are 4 mounting points in total and easy to follow instructions are supplied. This unit also features a lower mounting bar for easy alignment and acts as a locking bar, 2 fixings go through the side of the mirror when hung to secure the mirror to wall. This stops the mirror from falling if knocked and is a great safety feature especially in a house with pets and young children or businesses when an anti-tamper feature is preferable. Technical specification:Dimensions – 390mm (w) x 500mm (h) x 57mm (d) Orientation – Portrait onlyTuneable White LED Colours – Warm White 2700K / Natural White 4000K / Cool White 6500KLumens – 963lm @ 2700K, 990lm @ 4000K, 1053lm @ 6500kLED wattage – 9WSwitches – Touch Sens