Summer House

Solid Wood

Yes

Dip Treated

Shiplap

Burnt Orange

Yes

Yes

Apex

Double Door

Yes

Yes

Does Not Apply

Wooden sheds & summerhouses With most wooden sheds and structures the key to maintaining the building is ensuring that it remains on a firm and level base and protected against moisture penetration; Seal your windows: It is essential that all windows are sealed inside and out as soon as is possible after assembly. This could be achieved via the application of silicone, timber beading or any other suitable ‘water tight’ solution at your own preference. Treat your building annually: Although it may come with a factory basecoat you should treat your new garden building shortly after installation with a good quality water resistant treatment. This process should then be repeated annually with care taken to brush the treatment into all wooden components involved within the construction of the building, inside and out. Ensure nothing is in contact with your building: Any overhanging tree or hedge growth poses a threat to your garden building and should be cut back at regular intervals. If a tree branch makes contact with your building it may pierce the roofing felt and encourage water ingress. You should also check for any leaves which may have collected on the roof and clear them as soon as possible. A build up of leaves or similar organic matter can hold water which could cause the felt to fail and leak. Check and replace any damaged felt: If you do find any damage sustained to your roofing felt over time it is essential that you act upon this without delay. Should you discover a rip or tear in the felt it is recommended that this area be stripped from the roof and a new covering of high grade, heavy duty, mineral felt (which can be purchased online and/or at most retail DIY stores) be affixed immediately. Check your base: You should have already ensured the base was perfectly level at point of assembly but it is important to monitor this is still the case. Any movement of the base under the building can lead to twisting of the timber or dropping of the doors. Lubrication: All hinges should be lubricated with suitable oil to ensure continued ease of use.

United Kingdom

Yes

Toughened Glass

Yes

Yes

Yes

Full Outdoor Structure Assembly

No

No

Yes

Overall Interior Dimensions: 346.2cm W X 226.2cm D X 243cm H Overall Dimensions: 355cm W X 235cm D X 198.5cm H Overall Product Weight: 371kg Door Height - Top to Bottom: 179.2cm H Foundation Dimensions: No Door Width - Side to Side: 109.2cm W Footprint in Square Metres: 9.31m² Wall Thickness: 12mm